Clearance - SALE PRICES

1967-1969

67-69 CAMARO, PRO-TOURING Fiberglass Bolt On HOOD
PART#B-10107-Blem '67-'69 Camaro Pro-Touring Series 2.5" Bold On Fiberglass Hood. This part has minor scratches and a small crack above the opening. This can easily be fixed prior to paint. The air inlet comes closed from the factory but may be cut open for a functional ram air effect. There is no plastic bezel available for the opening. The part is sold as is and Harwood is not responsible for any freight damage or freight damage claims. If you have any questions prior to ordering call Harwood at 800-822-3392.
$300.00
Quantity:

1967-1969

B-10107-Blem 67-69 Camaro 2.5" Pro Touring Bolt on Hood
Harwood B-10107-Blem 67-69 2.5" Pro Touring Fiberglass Bolt on Hood: This hood bolts to the original hinges but you will need to replace the spring with the Harwood Low Tension Spring #210 (Not Included). The hood has minor scuffs and a small crack at the top of the opening. These can easily be fixed prior to paint. Perfect for the budget minded buyer.
$350.00
Quantity:
PRO-TOURING STREET SCOOP, TYPE II STYLE
Part#2207 Type II Style Pro-Touring street scoop is a universal fiberglass scoop intended to be trimmed and bonded to steel or fiberglass hoods. The scoop measures 39.5" long and is 2.5" tall. The scoop is 23" wide at the back and 17" wide at the front. Measurements do not include the 1.75" mounting flange.
$75.00
Quantity:

1999-2006

Harwood B-49102 - Blem
This is a new part in the original packaging. This part bolts to the stock hinge using all factory hardware. The openings are closed from the factory, but can be cut out to make it functional. There are no plastic bezels available for the openings. The hood comes unpainted and minor trimming may be needed for proper fit. It also, has minor surface imperfections in the gel coat that can easily be repaired prior to paint. This part ships via truck freight. A reliable day time phone number is required at checkout so that the freight company can contact you prior to shipping. Be sure and look the part over for any damage before you sign the Bill of Lading. If damage occurs, note it on the Bill of Lading and file a claim with the carrier. Harwood is not responsible for any freight damage or claims.
$400.00
Quantity:

1994-2003

42104-Blem
Harwood #42104-Blem 94-03 S-10 4" Cowl Fiberglass Lift Off Hood. This is a blemished part that does not bolt to the factory hinge, but is pinned on using Harwood #192 Kit (Not Included). There are pre-released low areas around the back corners of the hood. Also, minor trimming will be needed for proper fitment. This part ships via Truck Freight and a reliable Day Time phone number is required at checkout so that the freight company can contact you prior to delivery. In the event of damage, note it on the Bill of Lading and file a claim with carrier. Harwood is not responsible for any freight damage or claims. If you have any questions use the Ask the Seller option.
$225.00
Quantity:

1970-1981

11000-Blem
Harwood #11000-Blem 70-81 Camaro Fiberglass Front End: The front end has either low spots or other surface imperfections that can be fixed prior to paint. Perfect for the budget minded buyer. This part fits the 70-81 but is based on the later year model of 77-81. The front end is not for street use, but are made to save weight for drag racing. It does not bolt to the stock locations and will need to be installed by a qualified chassis builder. Trimming and other fabrications will be needed. This will ship via Truck Freight and a reliable Day Time phone number is required at checkout. Harwood is not responsible for any freight damage or freight damage claims. In the event of damage, note it on the Bill of Lading and file a claim with the carrier. If you have any questions contact Harwood prior to ordering.
$665.00
Quantity:

1967-1968

Harwood 10000-Blem 67-68 Camaro Fiberglass Front End
Harwood 10000-Blem 67-68 Fiberglass Camaro Front End: This does not bolt to the stock location and mounting hardware will need to be fabricated in order to install. The part is made out of a 3 piece mold that did not get lined up correctly. The part will still work fine but will need extra body work to make it perfect. This part ships via truck freight and a reliable day time phone number is required at check out. Harwood is not responsible for any freight damage or clams. In the event of any damage note it on the Bill of Lading and file a claim with the carrier. If you have any questions call 800-822-3392.
$700.00
Quantity:

1979-1993

#26090 1979-93 Mustang Wiper Cowl Panel - ABS Plastic
Harwood #26090 ABS Plastic Cowl Panel: This part has been discontinued in plastic and is now only available in fiberglass. These were left over after the switch. The part does not reach from fender to fender but replaces the middle wiper cowl vent. If you have any questions call Harwood at 800-822-3392.
$50.00
Quantity:

2003-2005

Harwood #B-50101 03-05 Chevy Siverado Fiberglass 3" Cowl Bolt on Hood
Harwood #B-50101-Blem 03-05 Chevy Silverado 3" Bolt on Hood. The hood also fits the 03-06 Avalanche(without body cladding). This is an unused part in the original box that bolts to the original hinges. The part has been discontinued and this is the last one. The hinge springs will need to be disconnected and a prop-rod used for this hood.(prop-rod not included) Minor trimming may be required for proper fit. Upon delivery, inspect the hood before you sign for it to check for any damage. If damage occurred, note it on the Bill of Lading and file a claim. Harwood is not responsible for any freight damage or claims. If you have any questions call use the Ask-the-Seller option.
$500.00
Quantity:

1982-1993

Harwood #41010 82-93 Chevy S-10/GMC S-15 Driver Side Fiberglass Door
Harwood #41010-Blem 82-93 Chevy S-10/GMC S-15 Fiberglass Driver Door: This is a new part that has minor surface imperfections such as light scratches to small low spots. Perfect for a budget minded buyer. This part is not intended for street use, but is designed to be a light weight alternative for drag racing. The door will need to be installed by an experienced chassis builder and does not operate like a factory door. It is also designed for polycarbonate racing windows (not included) and not the stock glass. (they do not roll up and down like factory) A reliable day time phone number is required at checkout so that the freight company can contact you prior to delivery. Harwood is not responsible for any freight damage or claims. In the event of damage note it on the Bill of Lading and file a claim with the carrier. If you have any questions prior to ordering call Harwood at 800-822-3392.
$200.00
Quantity:

1968-1974

Harwood #14010-Blem 68-74 Chevy Nova Fiberglass Driver Door
Harwood #14010-Blem 68-74 Chevy Nova Fiberglass Driver Door: This is a new part that has minor surface imperfections such as light scratches to small low spots. Perfect for a budget minded buyer. This part is not intended for street use, but is designed to be a light weight alternative for drag racing. The door will need to be installed by an experienced chassis builder and does not operate like a factory door. It is also designed for polycarbonate racing windows (not included) and not the stock glass. (they do not roll up and down like factory) A reliable day time phone number is required at checkout so that the freight company can contact you prior to delivery. Harwood is not responsible for any freight damage or claims. In the event of damage note it on the Bill of Lading and file a claim with the carrier. If you have any questions prior to ordering call 800-822-3392.
$200.00
Quantity:

Harwood Industries, Inc.

17833 Hwy 31 East, Tyler, Texas 75705 • Fax:903-566-4520 • Tech: 903-566-6001 Mon-Friday: 8am - 4pm(CST)

1-800-822-3392

Contact Photo Gallery ebay Store